![background image](http://html.mh-extra.com/html/hampton-bay/3573954/3573954_use-and-care-manual_587878011.webp)
Assembly — Hanging the Fan
4
Attaching the Fan to the
Electrical Box
5b
5a
Hanging Instructions for
Standard Mounting
Hanging Instructions for
Close-to-Ceiling Mounting
□
Pass the 120-volt supply wires through the center
hole in the mounting bracket (A).
□
Attach the mounting bracket (A) on the outlet box (II)
by sliding the mounting bracket (A) over the screws
provided with the outlet box. When using “close-to-
ceiling” mounting, it is important that the mounting
bracket (A) be level. If necessary, use leveling
washers (not included) between the mounting
bracket (A) and the outlet box (II). Note that the flat
side of the mounting bracket (A) is toward the outlet
box (II).
□
Securely tighten the two mounting screws.
WARNING:
To reduce the risk of fire, electric shock, or
other personal injury, mount the fan only to an outlet box or
supporting system marked acceptable for fan support and
use the mounting screws provided with the outlet box.
WARNING:
The tab in the ring must rest in the groove of
the hanger ball (D). Failure to properly seat the tab in the
groove could cause damage to the wiring.
WARNING:
The hook is only to hold the fan while attaching
wiring. Failure to hang as instructed may result in the tab
breaking, causing the fan to fall. The hook must pass from the
interior to the exterior of the canopy.
□
Carefully lift the fan motor assembly (E) up to the
mounting bracket (A) and seat the hanger ball (D) in
the mounting bracket (A) socket. Make sure the tab
on the mounting bracket (A) socket is properly seated
in the groove in the hanger ball (D). This will help to
balance the ceiling fan.
□
Carefully lift the fan motor assembly (E) up to the
mounting bracket (A) and hang the fan on the hook
provided using one of the holes at the outer rim of the
canopy (B).
A
A
E
D
E
B
B
11
A
II