9 . Installing the Light Kit
NOTE
: Before starting installation, disconnect the power by
turning off the circuit breaker or removing the fuse at fuse
box.
Turning power off using the fan switch is not sufficient to
prevent electric shock.
1
. Attach the light plate to the light plate holder by feeding
the wires (blue and white) out of the fans through the hole
of light plate and then screw it onto the light plate holder
with 3 screws, be sure to slide the light plate to the 2
screws on the light plate holder and rotate the light plate
clockwise until tight.
2
. Locate two single white and black wires in the light plate.
Make the polarized plug connections:
-White to white
-Blue to black
Note:
Secure the wires in place by wire holder (see
illustration).
3
. Install three 40 watt bulbs (included)
4
. Raise glass shade up against bottom of fan housing and
secure with three screws provided.
5.
Restore power and your light kit is ready for operation.
6.
If the light kit does not work, turn off the electricity and
lower either canopy or decorative housing on your ceiling
fan to make sure the blue wire is connected to the black
household wire.
Figure 15
Plate holder
Light plate
Glass shade
Bulbs
Screws
Screws
NOTE:
Light bulbs have no warranty, can be purchased
at local light bulb specialty store or from our service
center.
