Operation
PULL CHAIN OPERATING INSTRUCTIONS
PULL CHAIN OPERATING INSTRUCTIONS
Install two pull chains and fobs (KK) onto the pull chains located in the
switch housing (SS). Turn on the power and check the operation of the fan.
The pull chain controls the fan speed as follows:
1 pull - High, 2 pulls - Medium, 3 pulls - Low and 4 pulls - Off.
Speed settings for warm or cool weather depend on factors such as the
room size, ceiling height, number of fans, and so on.
To turn the light On or Off, pull the chain that is attached to the switch
housing (SS).
KK
13
Installing the fan without the
light kit (Optional)
□
Disassemble the switch housing cover (UU) from the
light kit (J). You can keep the light kit (J) for future use.
□
Attach the plastic plug (LL) to the switch housing cover
(UU).
□
Install the switch housing cover (UU) to the switch
housing with light kit mounting screws (II) provided.
II
UU
16
Assembly — Installing the Light Kit (continued)
LL
SS
