Assembly — Installing the Light Kit
15
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
11
G
12
Attaching the light kit to
the switch housing
Installing the light bulb
and glass shade
□
Remove the three light kit mounting screws (II) from
the switch housing (SS) and keep these screws.
□
While holding the light kit (J) under your fan motor
assembly (G), locate two single white and blue wires
in the switch housing labeled "FOR LIGHT". Make the
polarized plug connections (TT):
- White to white
- Blue to black
□
Carefully push all wires back into the switch housing
(SS). Install the light kit (J) onto the switch housing
(SS) with the three light kit mounting screws (II)
provided. Be sure to tighten all screws.
SS
J
TT
II
NOTE
:
If you do not wish to install the light kit, skip steps
11 through 12 and proceed to step 13.
□
Install the 9.5W LED bulb (JJ) (included).
□
Raise the glass shade (K) up against the light kit (J)
and secure it to the fan by turning the glass shade (K)
clockwise until snug. DO NOT OVERTIGHTEN.
CAUTION:
Before starting installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
K
JJ
G
J
