2
Thank you for purchasing this Hampton Bay interior track light. This product has been
manufactured with the highest standards of safety and quality.
FEATURES:
1.
Uses 120V, GU10 shielded type 50W bulbs.
2.
Track head is multi-directional.
3.
Adapter can be located anywhere along the track section.
QUESTIONS, PROBLEMS, MISSING PARTS:
Before returning to your local Home Depot, please call our Customer Service Team at 1-
877-527-0313 or visit www.homedepot.com. Please reference SKU 141-511, UPC
008938763424 or SKU 142-071, UPC 008938763400 or SKU 790-157, UPC
008938263429.
GENERAL:
1.
Be sure to read these installation instructions and review the diagrams thoroughly
before installing the track system.
2.
All electrical connections must be in accordance with local codes and the
National Electrical Code. If you are unfamiliar with methods of installing
electrical wiring, secure the services of a qualified licensed electrician.
3.
Before starting the installation, disconnect the power by turning off the circuit
breaker or by removing the appropriate fuse at the fuse box. Turning the power
off using the light switch is not sufficient to prevent electrical shock.
Note:
The important safeguards and instructions appearing in this manual are not meant to
cover all possible conditions and situations that may occur. It must be understood that
common sense, caution and care are factors that cannot be built into any product. These
factors must be supplied by the person(s) caring for, installing and operating the fixture. If
at any time you are uncomfortable or are unsure of what to do, please contact a qualified
licensed electrician for further assistance.
IMPORTANT SAFETY INSTRUCTIONS
1. Read all instructions before beginning the assembly or installation process. Save these
instructions and refer to them when additions to or changes in the track configuration
are made.
2.
For use with Hampton Bay EC series line voltage track systems only.
3.
CAUTION: LIGHTED LAMP IS HOT!
Keep away from curtains and other
combustible materials. Do not install any lamps closer than 6 inches (15cm) from any
curtain or similar combustible material.
4.
Do not touch lamp at any time. Turn off power and allow bulbs to cool down before
replacing. Use a soft cloth, gloves, or re-lamping tool (see diagram) to change bulbs.
Oil from skin may damage the bulb.
5.
CAUTION:
To reduce the risk of a burn during re-lamping, remove the track head
from the track before re-lamping. Do not touch hot lens, guard or enclosure.
6.
CAUTION:
To prevent the risk of fire and electric shock, do not attempt to connect
power tools, extension cords, appliances, etc to the track system.
7.
Do not install any part of this system (TRACK) less than 7 feet (2.2m) above floor.
SAVE THESE INSTRUCTIONS
TOOLS REQUIRED FOR ASSEMBLY & INSTALLATION (not included):
Ladder Gloves
