10
Assembly - Attaching the Fan Blades
Mounting the fan-motor assembly
(standard mount)
5
1
□
Align the locking slots of the canopy (C) with the two screws (II)
and alignment post (QQ) in the mounting bracket (A).
□
Push up the canopy (C) and turn clockwise until the alignment
post (QQ) engages to the round hole and the screws (II) engage
to the key slots.
□
Firmly tighten the two mounting screws (II).
□
Install the decorative bottom cover (HH) by aligning the cover
slots with screws in the bottom of the canopy (C). Rotate the
bottom cover (HH) clockwise to lock in place.
WARNING:
When using the standard ball/downrod mounting, the
tab in the ring at the bottom of the mounting bracket must rest in
the groove of the hanger ball. Failure to properly seat the tab in
the groove could cause damage to the wiring.
Assembly - Hanging the Fan (continued)
Attaching the blades to the blade
brackets
□
Attach a blade (G) to the blade bracket (H) by inserting the
screws (EE) into the holes in the blade and through the blade
bracket (H).
□
Tighten each screw securely.
□
Repeat this step for each blade and blade bracket.
NOTE:
Your fan blades are reversible. Select the blade side
finish which best accentuates your decor.
G
EE
H
E
C
A
II
HH
B
