6.
Do not use old oil containing impurities, so as not to lower the boiling point. This will
easily cause boiling or excessive soot.
INSTALLATION PRECAUTIONS
Please do not install or store the device in the following locations to avoid malfunctions:
1.
Unstable table or counter.
2.
Where there are flammable and explosive items around.
3.
Places where the temperature is too high, the humidity is too high, and the dust is
too much.
4.
Location where the power supply voltage is unstable.
5.
Where there is no good grounding device.
6.
Persons who are vulnerable, minors or have sensory impairments, should not be in
direct contact with the device.
7.
To prevent environmental pollution, a smoking exhaust device should be installed in
the place where the fryer is installed.
PRECAUTIONS WHEN FAULT OR ABNORMAL
CONDITIONS OCCUR
1.
If the fault or abnormal situation occurs, please stop using the device, disconnect it
from the power supply.
2.
Please do not use the pressure fryer when it is in an abnormal state. Do not
disassemble, repair or perform maintenance as specified in the manual. Other
maintenance and debugging should be carried out by certified professionals to avoid
electric shock, severe injuries and greater malfunction.
3.
When the oil leak is found, cease using the device immediately, and have employ a
qualified engineer to review and repair.
OPERATIONAL PRECAUTIONS
1.
The machine should be operated by the designated personnel to master the correct
use of equipment. This manual does not apply to persons who are vulnerable,
minors or have sensory impairments.
2.
The lid should be kept in place to ensure the pot is kept clean, and to preserve heat
and pressure whilst in use. When adding the lid, please pay attention to ensuring
there are no water droplets on the lid, that can drip into the hot oil, causing splashing
and injuries. When the pot is in operation, it should not come into contact with
untrained users and customers. The countertop and the outer casing of the pot will
Содержание TP-22L
Страница 3: ......