6
SETTING MIDI CHANNELS
To use this unit as a MIDI pedalboard, do the following:
①
Determine to which MIDI Channel the Bass is as-
signed on the MIDI instrument.
②
Set the MIDI Channel of the unit to the same chan-
nel as the Bass channel on the MIDI instrument (see
the diagram below).
Th
ere are several ways to use this unit. Below are several examples.
Hook-up example 1: MIDI pedalboard
To use this unit as a MIDI pedalboard, do the following:
①
Connect the MIDI OUT from the unit to the MIDI IN of the MIDI
instrument you wish to use as shown.
②
Make sure the unit and the connected instrument are set to the same
MIDI Channel (factory setting is MIDI Channel 3).
NOTE: You can change the MIDI channel of this unit. See P.9.
③
Turn the power to the unit “ON.”
④
In order for the connected instrument to function correctly, set the
MIDI function properly. Consult the manual for your connected
instrument if needed.
0
10
0
10
0
10
MIDI
IN
MAKING THE CONNECTIONS
0
10
0
10
0
10
MIDI cable
AC adaptor
AD2-1210/AD3-1210
To AC outlet
Preparing unit for use
①
Connect the AC adaptor AD2-1210/AD3-1210 into the DC IN jack
on the unit.
②
Hook the AC adaptor cord on the cord hook.
③
Connect the AC plug into an AC outlet.
MIDI Instrument
(e.g. electronic organ, arranger keyboard)
MIDI IN jack
MIDI OUT jack
DC IN jack
Set the Tx MIDI
channel(P.9)
MIDI Instrument
sound module in the instrument
Rx MIDI channel:assigned part
1:Upper
2:Lower
3:Bass（or Pedal）
4:Guitar
5:Synthesizer
16:Vibraphone
MIDI IN
XPK
MIDI OUT
Set the Tx MIDI
channel at “3”(P.9)
NOTE: The above example represents one possibil-
ity. The MIDI Channel assigned to Bass part
may vary among diff erent instruments.
HOW TO TURN THE POWER ON/OFF
LED
LED
Power ON
Power OFF
Press the POWER Switch.
The power turns on and the
LED will light on brightly for
about 1 second.
Press and HOLD the POWER
Switch for 1 second.
The power turns off and the
LED will light off .
Before switching the power to this unit "ON" or
"OFF," be sure to set the VOLUME of both this
unit and the connected amplifi er etc at "0." Also,
be sure the power to the connected amplifi er is
"OFF."
Do not connect or disconnect the audio cables
while the power to both units is "ON."
AUTO POWER OFF
This unit has an Auto Power OFF feature which will au-
tomatically turn the power to the unit "OFF" if no notes
are played or features accessed for 30 minutes (default
setting).
If you wish to disable this feature please consult "Auto
Power OFF" under the "ADVANCED OPERATION" section
on P.10.
