Hammerhead 900SX, Руководство по эксплуатации и обслуживанию

Страница: 6 / 48

2016-08 3 /
12
- - 1 - - 1
1.1 - INTRODUCTION
This manual has been prepared by the manufacturer and constitutes an integral part of the
vehicle; it must therefore be kept with care and in a safe place easily accessible to all users
(operators and service personnel) for the vehicle’s entire life time up to its demolition.
If the vehicle should be sold, make sure to give this manual, as well as all the enclosed
technical documents, to the new owner.
Copies of this manual and of the documents accompanying the vehicle may be requested
to the manufacturer by specifying the type of vehicle and its serial number.
1.1.a - PURPOSE OF THE MANUAL
The purpose of this manual is to provide all the instructions necessary for the vehicle’s op-
eration, use and maintenance.
By carefully reading the instructions and by scrupulously observing the safety rules contained
herein it is possible to obtain the best possible results in terms of performance, safety, ef-
fi ciency, operational management and duration of the vehicle.
Non-observance of such instructions could cause damage or harm to the vehicle, to people
and to the environment which cannot, in any case, be blamed on the manufacturer.
The indications and instructions of this manual are not meant to substitute, integrate or modify
any REGULATION, DIRECTIVE, DECREE or LAW of a general or a specifi c nature in force
in the country where the machine is to operate regarding safety, use and maintenance of
mechanical, electric, chemical, oil-pressure, pneumatic or other types of devices.
1.1.b - READING THE MANUAL
The manual is subdivided in chapters according to a logical sequence of knowledge and
use of the machine.
To easily search for the topics of interest, fi rst look at the CHAPTER SUMMARY at the
beginning of this manual and then look for the specifi c information in the summary of the
identifi ed chapter.
1.1.c - LEGEND OF THE SYMBOLS
To emphasize information and procedures regarding safety of use, maintenance, etc... the
following symbols are used throughout the manual:
DANGER:
Indicates an imminently hazardous situation which, if not avoided, will result in death
or serious injury.