Hammerhead 900SX, Руководство по эксплуатации и обслуживанию

Страница: 12 / 48

2016-08 9 /
12
- - 1 - - 1
- Use a battery charger appropriate to the battery’s capacity and features.
- Do not move the machine manually and do not start it while the battery is charging.
- Never remove or modify fi xed or mobile shielding guards.
If, for any reason, the shields or guards are removed, modifi ed or if the guards
are disabled or in poor condition, they must be restored to their original condition
before restarting the machine.
- Always maintain the safety decals in good, readable condition.
If the decals are missing, damaged, or unreadable, obtain and install replacement
decals immediately.
1.8.d - BEFORE STARTING THE MACHINE
- Walk around the machine to insure that all components are in good condition and
operational.
- Make sure that no foreign object is on the machine (rags, tools, etc...).
- Make sure all the battery caps are positioned correctly in their seat.
- The machine may only be operated after its good condition has been verifi ed.
1.8.e - DURING USE
- Operate the machine controls from the driver seat only.
- In the event you hear any strange noise or feel unusual vibration, if component or
system is not operating properly, stop the machine immediately.
Look for the cause and, if necessary, inform the Assistance Service.
- Operate very carefully and make sure nobody may touch the brushes while they
are rotating.
- Never try to brush objects that are either too voluminous or that could get entangled
in the machine brushes (such as cables, ropes, chains, etc...) and then be thrown
away.
- In case of use of the machine on an inclined surface, follow the maximum slope
line in order to avoid a rollover of the machine or situations that could compromise
it’s stability.
- Communicate any battery fl uid leaks: they are dangerous and highly polluting.