Hammerhead 100XTR, Руководство оператора

Страница: 4 / 103

100XTR Operator’s Manual
Intended Use
Overview - 3
Intended Use
HammerHead
®
pipe bursters are intended for the replacement of 4” (10.2 cm) to 16” (40.6 cm) diameter
buried pipes and conduits. The 100XTR produces 100 tons (91 t) of pullback force. A power unit provides
hydraulic power to run the pipe bursting unit.
The unit is designed for operation in temperatures typically experienced in earth moving and construction
work environments. Provisions may be required to operate in extreme temperatures. Contact your
HammerHead dealer. Use in any other way is considered contrary to the intended use.
HammerHead pipe bursters and power units should be operated, serviced, and repaired only by persons
familiar with their particular characteristics and acquainted with the relevant safety procedures.
Equipment Modification
This equipment was designed and built in accordance with applicable standards and regulations.
Modification of equipment could mean that it will no longer meet regulations and may not function properly
or in accordance with the operating instructions. Modification of equipment should only be made by
competent personnel possessing knowledge of applicable standards, regulations, equipment design
functionality/requirements and any required specialized testing.