Hammer N2-35, Руководство по эксплуатации

Страница: 19 / 60

19
"
!
Bandsaw
N2-35
5.3 Safety break switches
The machine only runs when the end switch in the inside
of the machine frame is engaged by the locking device
!
Lock system
"
Break switch
Fig. 5-3: Lock system
5.2 Data plate
The data plate displays the following specifications:
• Manufacturer information
• Model designation
• Machine number
• Voltage
• Phases
• Frequency
• Motor power
• Power supply
• Year of construction
• Motor specifications
Fig. 5-2: Data plate
5.4 Automatic braking system
Setting up the machine
Your machine is equipped with an automatic braking
unit. All necessary adjustments are done ex factory.
Please contact the FELDER KG service department, if
problems or a fault- function should occur!
Warning! Risk of injury!
In the event of a power supply failure, the electric brake is deactivated. The tool can therefore not come to
a complete stop within 10 seconds.
In this case, the machine will stop without using the the automatic braking system!