Hammer N2-35, Руководство по эксплуатации

Страница: 20 / 60

20
!
Bandsaw
N2-35
Attention! Dispose of the packaging materials in an environmentally friendly way and always in
accordance with local waste disposal regulations. If applicable, contract a recycling firm to dispose
of the packaging materials.
Warning! Risk of injury!
There is a risk of injury as a result of falling parts while transporting, loading or unloading the machine.
Attention! Risk of material damage!
The machine can be damaged or destroyed if it is subjected to improper handling during transport.
6.1 Safety instructions
6 Transport, packaging and storage
Note: Help preserve the environment!
Packaging materials are valuable raw materials and in many cases they can be used again or
expediently reprocessed or recycled.
6.2 Transport inspection
Upon arrival, inspect the shipment to ensure that it is
complete and has not suffered any damage.
If any transport damage is visible, do not accept the deli-
very or only accept it with reservation. Record the scope
of the damage on the transport documents/delivery note.
Initiate the complaint process.
For all defects that are not discovered upon delivery, be
sure to report them as soon as they are recognised as
damage claims must be filed within a certain period, as
granted by law.
6.3 Packaging
If no agreement has been made with the supplier to take back the packaging materials, help to protect the environ-
ment by reusing the materials or separating them according to type and size for recycling.
For this reason the following safety instructions must be observed:
• Never lift loads over a person.
• Always move the machine with the utmost care and
caution.
• Only use suitable lifting accessories and hoisting
devices that have a sufficient load-carrying capacity.
• Never lift the machine by its protruding parts (e.g.
sliding table).
• Consider the machine's centre of gravity when trans-
porting it (minimise the risk of it tipping over).
• Take measures to prevent the machine from slipping
sideways.
• Ropes, belts or other hoisting devices must be
equipped with safety hooks.
• Do not use torn or worn ropes.
• Do not use knotted ropes or belts.
• Ensure that ropes and belts do not lie against sharp
edges.
• Transport the machine as carefully as possible in
order to prevent damage.
• Avoid subjecting the machine to shocks.
When transporting the machine overseas, ensure that
the packaging is airtight and that a desiccant is
added to protect the metal parts against corrosion.
Transport, packaging and storage