Hammer K3 e-classic, Руководство пользователя, Страница: 34 / 80

34
!
"
#
$
Panel Saw
K3 basic/K3 winner/K3 e-classic
Setup and installation
7.3 Assembly
7.3.1 Sliding table
Attention: Due to transport reasons, the sliding table, depending on its length, may be packaged separately.
Two to three additional helpers, depending on the cutting length, are required to install the machine.
The sliding table has to be set up before the initial
machine start-up. Individual installation instructions
are found with the machine or the sliding table.
7.3.2 Assembling/disassembling the outrigger table
Fig. 7-5: Assembling the outrigger table
Assembling the outrigger table:
1. Hook the outrigger table into the groove on the slid-
ing table.
2. Place the outrigger table onto the support arbor.
3. Fix with a thumb screw.
Disassemble the outrigger table:
1. Loosen the thumb screw.
2. Unhook the outrigger table from the support arbor
and the sliding table.
!
Groove
"
Outrigger table
#
Support arbor
$
Thumb screws