MTS SHOULDER PRESS Assembly Instructions
8
4.
Bolt seat assembly to MTS SHOULDER PRESS.
Using two ½” x 3” bolts with hammerhead washers,
loosely fasten the seat assembly to the back frame. Using two ½” x 1-3/4” bolts with star washers on each
side, loosely fasten the seat assembly to the bottom frame.
1/2” x 3” (2)
1/2” x 1-3/4”
(2)
1-3/4” BOLT
3” BOLT
Assembly Figure 4. Bolt seat assembly to MTS SHOULDER PRESS.
5.
Bolt seat cushions to seat assembly.
Using two 3/8” x 2-1/2” bolts and 3/8” flat washers for the bottom
seat and four 3/8” x 1-1/2” bolts and flat washers for the back seat, fasten the seat cushions to the seat
assembly by lining up the bolt holes with the flanges as shown below.
