MTS SHOULDER PRESS Assembly Instructions
14
3. FINAL INSPECTION
IMPORTANT
:
IT IS VITAL THAT THESE MACHINES LOOK AND PERFORM
FLAWLESSLY BEFORE THE INSTALLATION CAN BE CONSIDERED
COMPLETE.
Before leaving the MTS SHOULDER PRESS, look to make sure the following have been completed:
1. All bolts have been tightened (but not overtightened) so that at least one thread protrudes out of the
locknut.
2. Look at all Hammerhead washers and make sure their locations match those shown in the detail drawing
in these instructions.
3. All weight plates have stickers on them as shown in the figure below.
10
20
30
40
50
60
70
80
90
110
120
130
140
150
100
Final Inspection Figure 1. Weight plate stickers must be on correctly.
4. The usage sticker and increment weight sticker locations match the drawings in these instructions.
