4.
Insert the two battery access cover tabs into console.
Item
Description
Qty.
1
Console
1
2
Battery Access Cover
1
3
Tab
2
5.
Tighten the battery access cover screw using a flat head screwdriver.
NOTE: Dispose of batteries safely after replacement or before unit disposal.
Service Schedule
All maintenance activities shall be performed by qualified personnel. Failure to do so could result in serious injury.
This is the minimum recommended service.
Determine Distance
1.
Verify foot plates are completely stopped.
2.
Grasp handrail and step carefully onto foot plates.
3.
Press and hold the Up arrow and Down arrow for 3 seconds.
4.
Navigate in the
Toolbox
menu to
STATS
with the Down arrow.
5.
Press the
GO/Enter
key to enter
STATS
.
1.
The
TOTAL ON TIME
and
TOTAL RUN TIME
is displayed on the
STATS
screen.
The time is displayed as
###:##:##
(Days:Hours:Minutes).
NOTE: A
Day
is recorded as 24 hours of use. It is not days used or days since installation.
6.
Record the
TOTAL RUN TIME
.
7.
Press the
GO/Enter
key to go
BACK
to the toolbox menu.
8.
Press the Down arrow to select
EXIT
in the setup menu.
9.
Press the
GO/Enter
key to exit
Toolbox
.
Daily Procedures
See detailed procedures in
section.
1.
Clean console
2.
Clean base.
Every 6 Months
The
TOTAL RUN TIME
for 6 months is approximately 6 days.
1.
Move unit and vacuum underneath. Lift the rear of unit and roll it back from its present position. Vacuum
underneath and return unit to normal position.
2.
Every 12 Months
The
TOTAL RUN TIME
for 12 months is approximately 12 days.
Page 26 of 30
Содержание HD SPARC
Страница 1: ...HD SPARC Owner s Manual PT SC 1018738 0001 REV AC...
Страница 2: ......
Страница 33: ......
Страница 34: ......
