HAMMELMANN B7.02502.0210, Руководство по эксплуатации, Страница: 240 / 311

Shell Omala S4 GX 320
Version 2.0
Effective Date 04.12.2012
Safety Data Sheet
Regulation 1907/2006/EC
11/17
Print Date 26.12.2012 000000019336
MSDS_DE
SECTION 12. ECOLOGICAL INFORMATION
Basis for Assessment
: Ecotoxicological data have not been determined specifically for
this product. Information given is based on a knowledge of the
components and the ecotoxicology of similar products. Unless
indicated otherwise, the data presented is representative of the
product as a whole, rather than for individual component(s).
12.1 Toxicity
Acute Toxicity
: Poorly soluble mixture. May cause physical fouling of aquatic
organisms. Expected to be practically non toxic: LL/EL/IL50 >
100 mg/l (to aquatic organisms) LL/EL50 expressed as the
nominal amount of product required to prepare aqueous test
extract.
12.2 Persistence and
degradability
: Expected to be not readily biodegradable. Major constituents
are expected to be inherently biodegradable, but the product
contains components that may persist in the environment.
12.3 Bioaccumulative
Potential
: Contains components with the potential to bioaccumulate.
12.4 Mobility in Soil
: Liquid under most environmental conditions. If it enters soil, it
will adsorb to soil particles and will not be mobile. Floats on
water.
12.5 Result of PBT and
vPvB assesment
: This mixture does not contain any REACH registered
substances that are assessed to be a PBT or a vPvB.
12.6 Other Adverse
Effects
: Product is a mixture of non-volatile components, which are not
expected to be released to air in any significant quantities. Not
expected to have ozone depletion potential, photochemical
ozone creation potential or global warming potential.
SECTION 13. DISPOSAL CONSIDERATIONS
13.1 Waste Treatment Methods
Material Disposal
: Recover or recycle if possible. It is the responsibility of the
waste generator to determine the toxicity and physical
properties of the material generated to determine the proper
waste classification and disposal methods in compliance with