Wireless ADSL Router
HRDSL521W
23
PPPoE/PPPoA:
Select this option if your ISP requires you to use a PPPoE connection.
This option is typically used for DSL services. Select Dynamic PPPoE to obtain an IP
address automatically for your PPPoE connection. Select Static PPPoE to use a static
IP address for your PPPoE connection. Please enter the information accordingly.
Bridge Mode:
Mainly use the MAC address to determine whether to forward data, in
this way, the router works like a switch. Select this mode if your ISP uses this mode.
PPPoE/PPPoA
User Name:
Enter the user name exactly as your ISP assigned.
Password:
Enter the password associated with the user name above.
Encapsulation:
select Bridge in the Mode field, select either PPPoA or RFC 1483.
select Routing in the Mode field, select PPPoA, RFC 1483, ENET ENCAP or PPPoE.
Multiplex: Select the method of multiplexing used by your ISP. Choices are VC or LLC.
Half Bridge
:
The Half Bridge mode can only be used when a single IP address has
been assigned by the ISP. It is used when the use of NAT is not desired and there is a
single computer attached to the router.
Connection:
The schedule rule(s) have priority over your Connection settings.
Always on
: Select Always on Connection when you want your connection up all the
time.
Connect on Demand
:
Select Connect on Demand when you don't want the connection
up all the time and specify an idle time-out in the Max Idle Timeout field.
Connect Manually
:
Select Connect Manually when you want to connect manually.
TCP MSS Option:
Enter the TCP Maximum Segment Size (MSS).
Get IP Address:
Choose Static or Dynamic.
Static IP Address:
Enter the IP address of ADSL Router in dotted decimal notation, for
example, 192.168.1.254 (factory default).
IP Subnet Mask:
The default is 0.0.0.0. User can change it to other such as
255.255.255.0.Type the subnet mask assigned to you by your ISP (if given).
Gateway:
You must specify a gateway IP address (supplied by your ISP) when you use
1483 Bridged IP in the Encapsulation
field in the previous screen.
Network Address Translation:
Select
None
,
Many to One
or
Many to Many
from the
drop-sown list box. Refer to the NAT chapter for more details.
Default Route:
if enable this function, the current PVC will be the default gateway to
internet from this device.
TCP MTU Option:
Enter the TCP maximum transmission unit (MTU).
Dynamic Route:
RIP Version:
(Routing Information protocol) Select this option to specify the RIP
version, including RIP-1, RIP2-M and RIP2-B. RIP2-M and RIP2-B are both sent in
