Wireless ADSL Router
HRDSL521W
11
2.4 The Rear Ports
PORT
DESCRIPTION
ON / OFF
Power ON/OFF switch
POWER
Connect the supplied power adapter to this jack
RESET
After the device is powered on, press it to reset the device
0-3 seconds: reset the device
6 seconds above: restore to factory default settings
WPS
Push WPS button to trigger Wi-Fi Protected Setup function
Ethernet
1 2 3 4
Connect a UTP Ethernet cable (Cat-5/Cat-5e) to one of the four
LAN ports when connecting to a PC or a 10/100 Mbps network
DSL
Connect the supplied RJ-11 (“telephone”) cable to this port
2.5 Cabling
One of the most common causes of problems is bad cabling or ADSL line(s). Make sure
that all connected devices are turned on. On the front of the product is a bank of LEDs.
Verify that the LAN Link and ADSL line LEDs are lit. If they are not, verify that you are
using the proper cables.
Ensure that all other devices connected to the same telephone line as your router (e.g.
telephones, fax machines, analogue modems) have a line filter connected between them
and the wall socket (unless you are using a Central Splitter or Central Filter installed by a
qualified and licensed electrician), and ensure that all line filters are correctly installed and
the right way around. Missing line filters or line filters installed the wrong way around can
cause problems with your ADSL connection, including causing frequent disconnections.
