1. Unscrew the two screws to remove the
back panel.
2. Align the HDD 44-pin IDE connector to
the black connector and insert it firmly.
3. Slide and push the HDD into the
aluminum enclosure.
4. Fix the back panel with the screws. The
enclosure is now ready to use.
WARNING
: Before using your external storage device, the hard drive must be formatted.
Please refer to your Operating System manual for the correct formatting procedure.
Changes
The material in this document is for information only and subject to change without notice.
Important information
Any loss, corruption or destruction of data while using a Hamlet drive is the sole responsibility
of the user, and under no circumstances will Hamlet be held liable for the recovery or
restoration of this data. To help prevent the loss of your data, it is highly recommended that
you keep TWO copies of your data; one copy on your external hard drive, for instance, and
a second copy either on your internal hard drive, another external hard drive or some other
form of removable storage media.
