Hamilton GEN 2 DTI, Руководство по программированию

Страница: 9 / 45

Document #101-0291 9 4/2021
Application – Timer Start Delay
Main Menu/Application/Timer Start Delay
• Press 4 to enter Timer Start Delay
Timer Start Delay allows you to determine how long of a wait before the DTI/DTT activates the timer’s
selector switch. In most scenarios, the default value is sufficient. If you wish to change it, set the desired
amount and press
F4
to save.
• Press 5 or Esc to go Back
Application – Welcome Prompts
Main Menu/Application/Welcome Prompts
Welcome prompts are assigned defaults by Hamilton. If you wish to customize these to your specific location,
this is where changes are made. The display on the DTI/DTT is a 2-line display, and will cycle between 3
different screens before looping back around to the first original screen.
• Press 2 to enter Welcome Prompts .
• The next screen displays:
1. Screen 1 Top
2. Screen 1 Bottom
3. Screen 2 Top
4. Screen 2 Bottom
5. Screen 3 Top
6. Screen 3 Bottom
7. Back
• Press 1 to enter Screen 1 Top
• The next screen displays:
1. Set Line Enable
2. Edit Line Text
3. Back
• Press 1 to enter Set Line Enable
This menu allows you to decide if you want the first top line of the welcome message to show on the
display of the DTI/DTT. Using the arrow keys, make your selection and Press F4 to save .
• Press 2 to enter Edit Line Text
• The next screen displays:
1. Predefined List
2. Custom
3. Back
If you want to choose one of the existing options that Hamilton has pre-programmed into the DTI/
DTT, press 1. Make your selection using the arrow keys and Press F4 to save .
CONFIGURATION MENU