Hamilton GEN 2 DTI, Руководство по программированию

Страница: 18 / 45

Document #101-0291 18 4/2021
System – Users (continued)
• The display should now show the User menu again:
1. Add User
2. Edit User
3. Delete User
4. Back
If you wish to add more users, repeat the previous steps for the remaining available users.
• Press 2 to Edit User
• The next screen displays:
1. User 1
2. User 2
3. User 3
4. Back
• Press 3 to select User 3
• The next screen displays:
1. User Enable
2. User Code
3. Local Password
4. Remote Password
5. Email Address
6. Rights
7. Back
• Press 1 for User Enable
This menu will allow you to disable a user without having to completely delete the user. Use the arrows
to move the marker and then
Press F4 to save
.
Options 2 through 5 will allow you to edit the existing user settings exactly like the user creation
process. Please refer to those instructions for the individual menus.
• Press 6 to enter Rights
• The next screen displays:
1. Admin
2. Audits
3. Configure
4. Remote
5. Back
*Note: if Admin is enabled, the individual rights will not be shown. If Admin is OFF, rights for each
individual user will be shown. These can be enabled/disabled individually.
SYSTEM