Hamilton Beach Summit HBH850-CE, Руководство по эксплуатации

Страница: 7 / 156

Pressing the MORE button displays cycle count screens and other diagnostic information, and also allows
you to access special functions.
Use ▲ or ▼ button to scroll through the options. Press
START
button to select that option.
Displays Hamilton Beach Commercial technical service number.
Special Control Functions
CUSTOMER SERV. INFO
START TO SELECT
RUN COOLDOWN CYCLE
START TO SELECT
AUTOBLEND 1 :B
START TO SELECT
SET FACTORY DEFAULTS
START TO SELECT
A NOT SET
START TO SELECT
CYCLES INTO WARRANTY
START TO SELECT
CYCLES THIS WEEK
START TO SELECT
CLEAR WEEKLY CYCLES
START TO SELECT
CLEAR ALL CYCLES
START TO SELECT
CLEAR ALL CYCLES
PRS START TO CONFIRM
SPECIAL FUNCTIONS
If blender motor overheats, this message will be displayed to prompt you to run
a cool down cycle. Remove container from blender and press
START . Once
cycle has completed and motor has cooled to a proper operating temperature,
display will revert to standby message.
Allows you to select and edit the preset cycle for indicated button.
Resets all settings except cycle counts to factory presets.
Indicates that there are no stored cycle settings for indicated button.
7