4
The cutting blades can be removed from the stainless-
steel shaft for cleaning or replacement. The cutter
head shaft has
left-hand
threads to prevent it from
coming loose or slipping during operation.
1.
Use a 7/32" (6 mm)
wrench or a pair of
needle-nose pliers to
hold the flat portion
of the shaft between
the cutter head and
the guard.
2.
While holding the
shaft in place, use
a 7/16" (12 mm)
wrench to turn the blades
clockwise
to loosen
the blades.
3.
When reinstalling the blades, thread the cutter head
into the shaft
counterclockwise
, and make sure it
is tightened securely in place.
Choosing and Installing Attachments–Cutting Blades
7/32"
Wrench
7/16"
Wrench
w
WARNING
Pinch and Cut Hazard
Make sure that the mixer is off and
unplugged before installing or removing
attachments and parts.
Blades are sharp! Use extreme care when
handling.
Failure to follow these instructions can result
in broken bones, cuts, or other serious injury.
Always keep the appliance unplugged during
assembly and disassembly.
When to Use the Blades:
The cutting blades are used for most chopping,
shredding, and mixing operations.
To Install the Cutting Blades:
1.
Fit the attachment into the end of the motor
housing, aligning the three tabs on the blade
assembly with the notches in the motor housing.
2.
While holding the motor housing in one hand, turn
the shaft base clockwise until it locks into place.
