4
6
Wait approximately 9–11
minutes. A small amount of
liquid may still look unfrozen
on the surface. This will be
absorbed into the pop when
removed.
9
Before making additional batches,
hand-dry the outside of the
freeze sleeve BEFORE each
batch.
5
Insert pop sticks through the
center of the funnel attachment
and into the liquid.
How to Make Frozen Treats
(cont.)
7
Push down on sides at the grip
locations BEFORE gripping stick
to remove freeze sleeve from
base.
8
To remove icy pop from freeze
sleeve, run water over the out-
side of the sleeve.
10
If making a second batch,
IMMEDIATELY dry the outside of
the sleeves, place in pop maker,
and repeat Steps 3–5. Do not
wash the pop maker between
batches.
NOTE:
The second batch of
pops will always take longer
than the first.
840210700 ENv04.qxd:Layout 1 11/15/11 1:57 PM Page 4
