3
Parts and Features
1. Filler Cap
2. Lid
3. Jar
4. Cutting Blades
(On models with cutting
assembly #4, the gasket
is permanently affixed
to the cutting blades.
Do not try to remove it.)
5. Jar Nut*
6. Sure Rest
™
Base*
7. Control Panel
8. Base
9. Cutting Assembly*
10. Gasket
Before First Use:
After unpacking blender, wash everything except blender base in
hot, soapy water. Dry thoroughly. Wipe blender base with a damp cloth or sponge.
DO NOT IMMERSE BASE IN WATER. Care should be taken when handling cutting
blades as they are very sharp.
Depending on which blender model you have purchased, your blender will
come with one of the following part combinations:
• Cutting Blade (#4) with Jar Nut (#5)
• Cutting Blade (#4) with SureRest
™
Base (#6)
• Cutting Assembly (#9) with Gasket (#10)
Wattage/Peak Power Information
The wattage/ampere rating of the
blender is determined by an
Underwriter’s Laboratory test and is
based on available cutting blades and jar
combinations that may not be provided
with your unit, but are available as
replacement parts. This is a measure of
input wattage/amperes after 30 seconds
of operation. The blender as provided
may draw significantly less power.
Peak power is the measure of the motor
wattage during the first seconds of oper-
ation. This is when a blender requires the
most power to crush ice, frozen fruit, etc.
This is a better measure of what a
blender motor can consume when
power is needed most.
840157000 ENv03.qxd 1/3/07 11:48 AM Page 3
