HameTech HM-434, Инструкция по эксплуатации

Страница: 32 / 42

32
Then, you click “Save as” to realize the wireless connection for two wire
networks.
Repeater Mode
: Under this mode, you can manually add MAC on the
opposite side to corresponding AP MAC address lists or do this through “Scan
Options”. This way, you can immediately strengthen and extend signals of the
wireless networks.
Encryption type : Three encryption modes are supported, namely WEP, TKIP
and AES.
Encrypt Key
: Enter the encrypt keys between the wireless equipment.
AP MAC Address : Please enter MAC address of the wireless equipment on
the opposite side.
7.5 WPS Configurations
Wi-Fi Protection Settings (WPS) can easily and quickly establish an
encrypted connection among clients of the wireless network. You have no need to
select the encryption mode or configure a key. You just need to enter correct PIN
code or select PBC (or press “WLAN/WPS” button indicated on the back panel)
to easily configure WPS.
Wi-Fi Protection Settings : Used to disable or enable WPS functions. The
default status is “Disable”.
WPS Mode : Support two kinds of simple WPS settings, namely PBC
(Push-Button Configuration) and PIN code.