Hameg HM 203, Руководство пользователя

Страница: 4 / 43

ACCESSORIES
H Z30 100M H z Oscilloscope Probe 10:1
Bandwidth DC-100MHz, Risetime 3.5ns. Maximum
input voltage 600V (DC + peak AC). Input impedance
10MQ. Input capacitance approx. 13pF, compensation
range 10-60pF. Cable length 1.5m. Supplied with
sprung hook, trimmer tool, spare tip, 1C tip, and
insulating tip.
HZ 35 Oscilloscope Probe 1:1
Bandwidth DC-10MF(z. Maximum input voltage 600V
(DC + peak AC). Input resistance equal to that of
oscilloscope.
Input capacitance 47 pF + input
capacitance of oscilloscope. Cable length 1.5m. Sup­
plied with sprung hook, insulating tip, 1C tip, and BNC
adapter.
HZ 36 Switchable Probe 1 0 :1 /1:1
This probe combines the specifications of the FIZ30 and
the FIZ35 in their respective attenuation ranges. In the
reference position the probe tip is grounded via a 9MQ
resistor, the oscilloscope input is connected directly to
ground. Cable length 1,5m. Supplied with sprung hook,
trimmer tool, spare tip, insulating tip, 1C tip, and BNC
adapter.
HZ37 High Voltage Probe 100:1
Bandwidth DC-50MFIz, Risetime 7ns. Maximum input
voltage
1500V (DC + peak AC). Input resistance
100MQ. Input capacitance approx. 4pF. Compensation
range 12-48pF. Cable length 1.5m. Supplied with
sprung hook, trimmer tool, insulating tip, 1C tip, and BNC
adapter.
H Z38 High Frequency Probe 10:1
Bandwidth DC-200MHz. Risetime 1.7ns. Maximum
input voltage 500V (DC + peak AC). Input resistance
10MQ. Input capacitance approx. 13pF. Compensation
range 12-48pF. Cable length 1.5m. Supplied with
sprung hook, trimmer tool, spare tip, 1C tip, insulating tip.
H Z39 Demodulator Probe
Bandwidth approx. 35kFlz-250MFIz RF input voltage
range 0.25Vrm s to 40Vrms. Maximum input voltage
200V (DC + peak AC). Output polarity is positive. Cable
length 1.5m. Supplied with sprung hook, 1C tip,
insulating tip, and BNC adapter.
H Z32 Test Cable BNC-4mm
Coaxial test cable with BNC male plug at one end and
shielded banana-plug at the other. Cable length 1.15m.
Cable capacitance 126pF. Characteristic impedance
50Q. Maximum input voltage 500V (DC + peak AC).
HZ 34 Test Cable BIMC-BNC
Coaxial test cable with BNC male plugs at each end.
Cable
length 1.2m. Cable capacitance 126pF.
Characteristic impedance 50£X Maximum input voltage
500V (DC + peak AC).
HZ 20 Adapter 4 mm to BNC
Two 4 mm binding posts 19 mm between centers to
standard BNC male plug. Maximum input voltage 500V
(DC + peak AC). Dimensions 42x35x1 8mm.
H Z22 5 0 Through-Termination
Should be used to terminate signal generators or coax-
cables with 5 0 0 characteristic impedance or when
measuring high frequency sine wave signals to avoid
standing waves. Maximum load 2W. Maximum voltage
lOVrms. Dimensions 14x20x62m m .
H Z42 Carrying Case
Suitable for Oscilloscopes FIM203-1, 203-3.
H Z43 Carrying Case
Suitable for Oscilloscopes HM31 2, 41 2, 51 2, 705.
H Z44 Carrying Case
Suitable for Oscilloscopes FIM307 and for FIZ62, 64.
HZ45 Carrying Case
Suitable for Oscilloscope FIM 103.
HZ46 Carrying Case
Suitable for Oscilloscope HM 203-4, FIM204.
HZ47 Viewing Hood
Suitable for Oscilloscopes FIM203, 204, 705, 808.
HZ 65 Component Tester
Works with any oscilloscope featuring X-Y operation. An
indispensable aid when repairing electronic equipment as
it displays the current-voltage characteristics of any com­
ponent on the screen. Components can also be tested
"in-circuit” , with clear go / no go indication within
seconds. For low power transistors two sockets are pro­
vided with switchable connections, facilitating tests of
each junction. Test currents of approx. 3.7mArms,
37mArms, and 320m Arm s can be selected with slide
switch. Supplied with pair of test leads, two coax-cables
for scope, power cord. Safety Class II.
Printed in West Gemany (1 983)