www.hameco.eu
HV-100E User Manual
hameco
27
Target lost time(s):
It means how much time is required (60s by default) for tracking camera to per-
form “target lost action” when target is lost (default: return to panoramic preset).
For the setting of the action code, see the chapter “6. Recording and broadcasting host connection
instructions”.
For the setting of the server, please refer to the chapter “6. Recording host connection instructions”
After completing the relevant settings, you need to click Save. According to specific scenarios and cus
-
tomer needs, you can enter the advanced parameter section multiple times to modify the configuration
values to achieve the best results.
6. DESCRIPTION OF RECORDING AND
BROADCASTING HOST
6.1 Auto Tracking Control
The recording and broadcasting host sends command by LAN network port and controls automatic
tracking motion of teacher tracking camera. In auto tracking mode, it does not allow control the pan
rotation or zoom by the control interface from the browser or remote control; in stop auto tracking
mode, it is allowed.
1. Network receiving address
Teacher auto tracking camera default IP is: 192.168.5.163.
2. Command
Action
Command
Start teacher tracking
0x810x0A 0x08 0x01 0x020xFF
Stop teacher tracking
0x81 0x0A 0x08 0x01 0x03 0xFF
6.2 Action Code Docking
Tracking status of teacher tracking camera will be feedback to recording and broadcasting host in real
time via network (UDP transmission mode) in the action code form.
1. Configuration of recording and broadcasting host address
If recording and broadcasting host uses LAN to receive action code, then it needs to configure host
address by web browser. Click
Advanced settings -> Server
, as shown below:
