www.hameco.eu
HV-100E User Manual
hameco
16
av1 close-up sub-stream, av2 panoramic main stream, av3 panoramic sub-stream, av4 broadcast
code stream.)
2) Ethernet parameters
DHCP:
Enable or disable obtain IP automatically can be set. Save changes and reboot the device to
takes effect (default: OFF)
IP Address:
Set the IP address, save changes and reboot the device to takes effect (default
192.168.5.163). Note: This IP address is the same with the one used to login Web page.
Subnet Mask:
Set the subnet mask (default 255.255.255.0).
Default Gateway:
Set the default gateway (default 0.0.0.0).
Physical Address:
Set the physical address (the parameter is read-only but can not be modified).
Click on the “Save” button, it will be valid when display “Save successful”. (Note: To prevent IP
conflicts When modify)
3) DNS parameters
Preferred DNS server:
set the preferred DNS server. (Default 0.0.0.0).
Alternate DNS server:
Alternate DNS server settings. (Default 0.0.0.0).
Click on the “Save” button, it will be valid when display “Save successful”.
4) GB28181
Switch:
set whether open GB28181, can check
Time Synchronization:
whether synchronization time is set, you can check
Stream Type:
stream type setting (the default main stream, secondary stream optional)
Sign effective time (in seconds):
3600 Range 5-65535
Heartbeat time (seconds):
60 Range 1-65535
Register ID:
34020000001320000001
Register User name:
IPC
Register Password:
12345678
Equipment ownership:
Users can add their own
Administrative regions:
Users can add their own
Alarm Zone:
Users can add their own
Equipment installation address:
Users can add their own
Local SIP Port:
5060 Range 0-65535
GB28181 Server Address:
IP address of the computer
Server SIP Port:
5060 Range 0-65535
Server ID:
34020000002000000001
Click on the “Save” button, it will be valid when display “Save successful”.
5) SRT
SRT port:
Set the SRT port, change and save and restart the device to take effect (default 9000
,
0-65535 optional)
SRT password:
Set the SRT password, change and save it and restart the device to take effect
(the
default is empty, the password is between 10-80 characters)
SRT password length:
Set the length of the SRT password, change and save it and restart the device
to take effect (default 0, 16, 24, 32 optional)
