Hamamatsu ENERGETIQ LDTLS TLS-EQ-77H, Руководство по эксплуатации

Страница: 40 / 45

35
See below if any problems are encountered in operating the EQ-77.
Condition:
Controller Fault and/or Lamp House Fault LED(s) are ON.
Action:
•
Always begin operation of the source by verifying the interlocks.
• Confirm that the external interlock contact is closed (or that the black jumper plug is fully inserted
into the back of the EQ-99-RC Remote Control Box)
•
To reset or clear a Fault condition, actuate the “Operate” switch from the ON position to the OFF
position. If a fault was generated while the “Operate” switch was in the OFF position, first actuate
the switch to the ON position, then to the OFF position. The unit will not turn on if a fault condition
exists.
•
If all the interlocks are OK and either the lamp or controller interlock faults will not clear, please
contact the factory.
Condition:
Lamp fails to ignite after several tries.
Action :
•
Contact Energetiq.
8. Accessories
The TLS-EQ-77H requires a chiller to maintain the cooling requirements in Section 3.4. For your
convenience, Energetiq offers a suitable chiller produced by Solid State Cooling, Inc. You may also
choose to procure a chiller directly through your local Solid State Cooling, Inc representative (SSC Model
U190 W Chiller .
PN Description
EQ-77-CHILLER-KIT EQ-77 Chiller / with Tubing Kit
Note: Cooling fluid is not included and must be locally sourced.
9. Warranty
Energetiq Technology, Inc’s warranty for the product is set forth in Section 5 of Energetiq Technology
Inc’s standard terms and conditions, found at www.energetiq.com .
10. Drawings, Schematics, and Pin Assignments