C9300-201 Ver.1.2
35
(5) Status commands
Status commands return the current settings values.
Commands Return
value
?AMD
(read Acquire MoDe)
N/E
?NMD
(read Normal MoDe)
N/S/T
?EMD
(read External MoDe)
E/L/T/f
?SMD
(read Scan MoDe)
N/S/A
?ADS
(read A/D Select)
12/10/8
?TNS
(read CCD Tap Number Select)
1/2
?SHT
(read Shutter Time)
n
?EST
(read External ShutterTime)
n
?AET
(read Acquire Exposure Time)
ss.xxxxxx
?ATP
(read Acquire Trigger Polarity)
N/P
?SPX
(read Super Pixel X)
1/2/4/8
?SVO
(read Scan V-Offset)
n
(0 to 472)
?SVW
(read Scan V-Width)
m
(8 to 480)
?SLP
(read Set Line Position)
y1,…,y16
?ESC
(read External trigger SourCe)
M/I
?CEG
(read Contrast Enhancement Gain)
n
(0 to 15)
?RES
(read RESponse)
Y/N
The following command is a special status command not in the group of setting
commands.
(read ROM VERsion)
Function
Returns the version of the camera’s internal ROM.
?VER
Return value
x.xx
(read INFormation)
Function
Returns the information of the camera’s Firmware
and Timing generator.
?INF
Return value
x.xx - y.yy
x.xx: Firmware
y.yy:
Timing
generator
(6) Obtaining camera hardware information commands
This command returns information about the camera hardware. This command differs
from other status commands, in that it includes parameters.
(CAmera Information)
Parameter
T
: Camera type name
H
: CCD effective horizontal pixel count
V
: CCD effective vertical pixel count
A
: Output bit count
I
: A/D converter bit count
O
: Camera options
B
: Binning count
?CAI
Example
?CAI H
Æ
CAI H 640
