Hamamatsu Photonics C15550-20UP Скачать руководство пользователя страница 19

Страница: 19 / 72

qCMOS Camera C15550-20UP / C15550-20UP01 Instruction manual_Ver.1.3

•

Place the camera the ventilation ports to be lateral side. Do not place the rear

panel of the camera, which connectors are located, to be at the bottom (Do

not block ventilation openings.).

•

When you connect cables, turn off the power supply of the camera and the peripheral devices.

•

If you use the above options, see each installation manual.

AC adapter

This is the cord to supply a power supply. Use the accessory AC adapter.

Cooling water hose (at Water-cooling: Option)

It connects the camera and circulating water cooler. The insert position of WATER IN/OUT on the

camera WATER connector is not specified.

•

See 8 “WATER COOLING” for instruction of water-cooling.

CoaXPress interface cable 1 - 4 (Option)

These are the cables to connect the CoaXPress interface connector 1 to 4 of the camera and the

CoaXPress interface connector 1 to 4 on the computer, respectively.

•

When a connection interface is changed from CoaXPress to USB, and vice versa, the

application software must be closed and the camera must be turned off.

•

Do not connect CoaXPress and USB interface simultaneously.

•

Hamamatsu recommends A14590-05-40 optional CoaXPress interface cable for this

camera. The camera complies with EMC and FCC regulations with using A14590-05-40

CoaXPress interface cable. Be careful that the camera with other interface cable may not

fulfill the EMC and FCC directive requirements.

USB interface cable (Option)

This is the cable to connect the USB interface connector of the camera and the USB interface connector

on the computer.

•

When a connection interface is changed from CoaXPress to USB, and vice versa, the

application software must be closed and the camera must be turned off.

•

Do not connect CoaXPress and USB interface simultaneously.

•

Hamamatsu recommends A12467-03 optional USB interface cable for this camera. The

camera complies with EMC and FCC regulations

with using A12467-03 USB interface cable. Be careful that the camera

with other interface cable may not fulfill the EMC and FCC directive requirements.

Содержание C15550-20UP









































































Результаты поиска

Содержание C15550-20UP

Отзывы:

Похожие инструкции для C15550-20UP

Бренды по названию

Популярные бренды

Hamamatsu Photonics C15550-20UP, Инструкция по эксплуатации

Результаты поиска

Содержание C15550-20UP

Отзывы:

Похожие инструкции для C15550-20UP

Бренды по названию

Популярные бренды