Hamamatsu Photonics C11440-22C, Инструкция пользователя

Страница: 39 / 51

C11440-22C Instruction manual_Ver.1.4
37
14. SPECIFICATIONS
14-1 CAMERA SPECIFICATIONS
(1) Electric specifications
Imaging device Scientific CMOS image sensor FL-400
Effective number of pixels 2048
(H)
× 2048
(V)
Cell size 6.5 µm
(H)
× 6.5 µm
(V)
Effective area 13.312 mm
(H)
× 13.312 mm
(V)
Full well capacity (typ.) 30 000 electrons
Readout noise (typ.) 1.3 electrons
Dynamic range *
1
23 000 : 1
Cooling method Peltier Forced air-cooled / Water-cooled
Cooling temperature
at Forced air-cooled: - 10 °C (Ambient temperature: + 20 ºC)
at Water-cooled: - 20 °C (water temperature: + 20 ºC)
at Water-cooled (max.): - 30 °C (water temperature: + 15 ºC)
Dark current (typ.)
at -10 °C: 0.5 electrons/pixel/s
at -20 °C: 0.15 electrons/pixel/s
at -30 °C: 0.05 electrons/pixel/s
Free running mode 100 frame/s
at Full resolution
External control mode 90 frame/s
Free running mode 200 frame/s
at 1024 lines
at center position
External control mode 164 frame/s
Free running mode 25 655 frame/s
Frame rate
at 8 lines
at center position
External control mode 877 frame/s
A/D conversion 16 bit
Readout mode
Binning readout *
2
(Digital binning): 2×2, 4×4
Sub-array readout
Exposure time
Free running mode: 1 ms to 10 s
Free running mode (Sub-array): 38.96 µs to 10 s
External control mode: 1 ms to 10 s
Digital interface CameraLink full configuration Deca mode
Lens mount C-mount
External trigger input level 3.3 V LVCMOS level
External trigger delay
function
0 µs to 10 s (10 µs steps)
External signal output
Global exposure timing output
Trigger ready output
Programmable timing output 1
Programmable timing output 2
Programmable timing output 3
(Continuous High or Low output)
*
1 Calculated from the ratio of the full well capacity and the readout noise.
*
2 Digital binning processing in the camera.