• Click to select “CITY 1”, “CITY 2”, “CITY 3” or “CITY 4” on the top of the program
• Click [SET LOCATION] to select the location
• Click [SAVE] to save & exit the setting. The PC program will automatically update the 4-day forecast of your selected city from the Internet
• To view the weather forecast of your preset city list, click the corresponding city number
NOTE: The forecast information of city 1, 2, 3 & 4 will not be sent to your main unit
Update forecast
Click [UPDATE FORECAST] to manually receive 4-day forecast from the Internet of your selected city.
Troubleshooting
1. Ensure that you are using Windows 2000, XP or Vista and your PC is connected to the Internet. Try browsing through a couple of websites to make sure.
You need to have Microsoft .NET Framework 1.1 driver installed in your Windows in order to complete the installation of the 4-day forecast PC program.
If this fi le was not installed in your Windows before, the PC installation program will redirect you to the Microsoft web site for download. You may also
go to below link to download the driver directly if you encounter any problem: http://download.netinfostation.com After .NET Framework 1.1 is installed,
run the NIS01_INSTALL.EXE (or INSTALL.EXE) installation program again.
2. Ensure that the USB transmitter is properly connected to the USB port of your PC. Otherwise, you are unable to run the PC program and access the
4-day forecast update from the Internet
3. Ensure all batteries in the main unit & USB transmitter are fresh. Replace battery when the respective low battery indicator appears on the main unit
(refer “LOW BATTERY INDICATION” section)
4. If the toolbar icon of the PC program disappears (not hidden) on the lower right of your Window, your program is terminated and no longer access 4-day
forecast from the Internet. Restart the program again
5. In the fi rst few minutes of the RF reception from USB transmitter, the main unit is showing data on one part of the screen and this is normal. The rest
of the screen display data will gradually appears in the next 10 minutes or more. If you have waited 1 hour or more without seeing the rest of the screen,
shorten the distance between the USB transmitter & main unit and check the battery levels. Then repeat the setup procedure in “Establish RF
connection with main unit” section. If it continues to fail, try removing the USB connection and all batteries from the USB transmitter. Reinstall the
batteries and then reconnect the USB connection again. Repeat the setup procedure in “Establish RF connection with main unit” section.
6. If the RF indicator is showing full strength but one or more of the next 3 days’ forecast is missing on the main unit & PC program, your PC may be
offl ine for many days. Connect your PC to the Internet again to receive the latest forecast update
7. If all forecast information appears except the UV Index, your PC may be offl ine for more than 1 day. Connect your PC to the Internet again to receive the
latest UVI forecast update
8. If the forecast reading of the PC program does not match with the main unit. Press [TRANSMIT] on the USB transmitter to re-transmit signal again and
wait for 10 minutes or more
9. If your time on the PC program & main unit is off by half an hour or more, click [SETTING…] on the PC program and set the hour offset until the proper
time is set.
10. If your city does not appear in the 20.000 city list, select the one near your home location
11. Heavy Internet traffi c may slow down the respond of the server temporary. Try later if you wish to update the forecast manually by the [UPDATE
FORECAST]
button.
Battery disposal
Replace only with the same or equivalent type recommended by the manufacturer. Please disposal of old, defective batteries in an environmentally friendly
manner in accordance with the relevant legislation.
16
Specifi cations
Software:
Compatible with Windows 2000, XP & Vista (Microsoft .NET Framework 1.1 required)
USB:
1.1 or above
Transmission:
Up to 100M (330 ft.) in open area
Clock:
Auto-synchronized clock from Internet, Quartz back-up
Power:
AA x 6 pcs for main unit
AAA x 3 pcs for USB transmitter
Registration and Safety Certifi cation/General Information
This device bears the CE symbol as specifi ed by the provisions of Directive R & TTE (1999/5/EC).
Hama GmbH & Co. KG hereby declares that this device is in compliance with the basic requirements and other relevant guideline and regulations of the
1999/5/EC guideline. You will fi nd the declaration of compliance and declaration of conformity in the Internet at http://www.hama.com
17
00087687man_de_el_en_fr_nl_pl.indd Abs2:16-Abs2:17
00087687man_de_el_en_fr_nl_pl.indd Abs2:16-Abs2:17
19.01.11 11:27
19.01.11 11:27
