Hama USB Multifunction Server, Инструкция по эксплуатации

Страница: 14 / 32

13
Computers:
The TCP/IP protocol must be installed on all computers
that are to use the device. Proceed as follows to check
the settings on your PC:
Windows 2000/XP Start -> Settings -> Control Panel ->
Network Connections
Select the connection (network adapter) via which your
PC is connected to the device, e.g.
“LAN connection” .
When you right-click the appropriate connection, a
menu is displayed; select Properties. Select the entry
Internet Protocol (TCP/IP) from entry in the list and click
Properties.
Select Use the following IP address and enter these
addresses:
First PC
192.168.2.101, subnet mask 255.255.255.0
Second PC 192.168.2.102, subnet mask 255.255.255.0, and
so on
Confi rm with OK and Close.
Windows Vista
Start -> Network -> Network and Sharing Center ->
Manage network
connections
Select the connection (network adapter) via which your
PC is connected to the device, e.g. “LAN connection”.
When you right-click the appropriate connection, a menu
is displayed; select Properties. Select the entry Internet
Protocol Version 4 (TCP/IPv4) from the list and click
Properties.
Select Use the following IP address and enter these
addresses:
First PC
192.168.2.101, subnet mask 255.255.255.0
Second PC 192.168.2.102, subnet mask 255.255.255.0,
and so on
Confi rm with OK and Close.
MFS
Please also assign a static IP address to the MFS that
works for your network. This is entered under Confi gure
server/TCP/IP and then Static IP address. An IP address
that would work with the aforementioned addresses
would be 192.168.2.30.
4. Control Center
Open the Control Center from Hama. To do so, click Start
Start -> Programs -> Hama USB Multifunction Server ->
Hama USB Multifunction Server Control Center.
If the program is already running in the background, you
will fi nd it in the task bar at the bottom right of the screen:
Click the circled icon to open the program from the task
bar. The Control Center starts with the following view: