10
13. Bass control
•
Press [
BASS +/-
] (5/6) on the remote control to increase
or reduce the loudspeaker's bass.
14. Wireless network connection (WLAN)
Depending on the network, there are a number of ways
to connect to it.
PBC setup
•
Press the [
SETUP
] button (2).
•
The status LED flashes quickly green.
•
Press the WPS button on your router or current access
point. This can often be done using the web interface,
as well.
•
Consult the operating instructions of your router / AP
for details of the exact procedure.
•
Once the procedure has also been initiated on the
router / AP, the loudspeaker should connect with the
access and the network connection should be available.
Note
•
Press the [
SETUP
] button (2) to abort PBC setup.
Open network
Note
•
We recommend against establishing unsecured
connections and advise you to always protect your
network against unauthorised access.
•
If the network you plan to use does not have any
security features, simply select the network from
the list and confirm it. The radio then connects
immediately to the network.
15. Establishing a connection with another home
network
•
Press and hold the [
SETUP
] button (2) for around
7 seconds. The status LED flashes rapidly.
•
The loudspeaker can now be connected to another
network.
16. Factory reset
To reset the loudspeaker to the factory default settings
(delivery condition), proceed as follows:
•
Press and hold the [SETUP] (2) and [Action] (4) buttons
for around 6 seconds to reset the loudspeaker to the
factory default settings.
•
Once the loudspeaker has been reset, it restarts.
Note
•
Resetting to the factory default settings can solve
some problems and malfunctions.
•
However, all settings made previously, such as
equaliser presets, favourites and network profiles,
are permanently deleted.
17. Software update
•
We are constantly developing new software features
and improvements for our loudspeaker to fix potential
problems, add functionality, etc.
•
We recommend that you always install updates to your
loudspeaker.
•
Update notifications will be provided in the Hama Smart
Audio App.
•
During the update, the Update status LED (2) lights
up solid.
Warning
•
Make sure that the radio has a stable power supply
before you start a software update.
•
Power supply failure during a software update can cause
irreparable damage to the loudspeaker.
18. Wall mounting
Note
•
Ensure that the mount you have chosen can carry
a load of at least 5 kg.
•
Follow the directions and safety notes included
with the mounting bracket.
•
With the correct mount, it is possible to attach
the loudspeaker to the wall.
•
To do this, use the mounting holes (1) on the back
of the loudspeaker.