9
10.3 Playback from a tablet / smartphone
To access one of the existing network shared files directly
from the loudspeaker, proceed as follows:
•
Open the Hama Smart Audio App and select the required
loudspeaker.
•
This takes you to the playback screen and the associated
source selection in the footer.
•
Touch [Sources] and then [Local content].
The memory in your smartphone / tablet is automatically
searched and tracks found are grouped by category
(Albums, Artists, Country, Folder).
Select a category and the required track.
11. Alexa function (voice control)
•
After saying the activation word ("Alexa") or pressing the
[
Action
] button (4), the status LED lights up blue and
a signal tone sounds. You can now talk to Alexa.
•
While Alexa is answering, the status LED flashes blue.
Note
•
If the Amazon Market App has already been installed
and set up on your smartphone, some smartphones
will take the user data directly from the App.
•
To set up a new Amazon account, log out and repeat
the steps described in this section.
Note - Alexa Push to Talk / function key
•
Briefly press the [Action] button (4) on the
loudspeaker to activate Alexa during audio mode or
higher volume. Alternatively, press the [Action] button
(3) on the remote control.
•
Press the [Microphone Mute] button (3) to switch the
microphone off. If the microphones are deactivated,
the status LEDs (1-5) light up solid red. Alternatively,
press the [Microphone Mute] button (4) on the remote
control
•
The loudspeaker will now no longer respond to the
activation word until the microphones are reactivated.
•
Press the [Microphone Mute] button (3) again to
reactivate the microphone. Alternatively, press the
[Microphone Mute] button (4) on the remote control.
The status LEDs (1-5) go out.
12. Equaliser profiles
The equaliser allows you to adjust the sound of the
loudspeaker to your preferences by altering the bass intensity.
You can choose from a preconfigured profile or create your
own custom profile.
•
Press [EQ1] (9) on the remote control to call up the
pre-configured profile.
To create a custom profile, proceed as follows:
•
Press [EQ2] (11) on the remote control to start the
configuration process.
•
Change the bass intensity (5/6) on the remote control.
If playback is already started when you modify these
settings, you can hear the changes in the audio
immediately.
•
Confirm your settings by pressing [EQ2] again.
Configuration can also be carried out via the App.