d
Bedienungsanleitung
GB
34
MW-900
CAUTION
The sensor may be damaged if the alcohol
concentration is too high.
Using alcohol with a high concentration may cause
damage to the sensor.
Always use alcohol with a concentration of 3-5%.
►
To start ASC, press and hold down the BLOW button (7)
and the button (5) for three seconds, until the device
beeps twice.
The cleaning process takes approximately 10 minutes.
“ASC” flashes on the display (11) throughout the entire
cleaning process. Remaining time is indicated on the
display as a number between 0 and 10. After the cleaning
process is complete, the device beeps once. As soon as this
happens, switch the device off.
NOTE
You can cancel the ASC process at any time by
switching off the device.
►
Remove the cleaning cap and blow fresh air several
times into the mouthpiece (1) using the air blower
(included in delivery) in order to
remove any leftover alcohol.
Start the device’s self cleaning process
(see the chapter entitled “Cleaning the
device”).
u
u
u
00087696bda_neu.indd 34
00087696bda_neu.indd 34
06.08.2009 10:52:53 Uhr
06.08.2009 10:52:53 Uhr