Hama LiberoBuds, Руководство по эксплуатации

Страница: 5 / 82

4
4. Getting Started
• The two earphones and the charging box are equipped with a
rechargeable battery. The batteries must be fully charged before
using the product for the first time.
• Ensure that the earphones are switched off before charging them.
• Begin charging by connecting the included USB charging cable to
the charging socket (9) as well as to the USB connection of a
PC/laptop. Alternatively, you can charge the charging box using a
suitable USB charger. Please refer to the operating instructions for
the USB charger used.
• Place the earphones in the charging box, making sure to match
them with their correct positions (refer to the L and R labelling on
the product).
• The status LEDs of the earphones (4) are constantly lit red
during charging.
• The charging indicator of the charging box (2) flashes blue.
• It can take up to 1 hour to fully charge the earphone batteries, up
to 2 hours to fully charge the battery of the charging box.
Warning
Do not use the earphones while they are charging.
• Once the earphones have been fully charged, the status LED (4)
lights up and then goes out. It takes about 1 hour to fully charge
the earphones.
• Once the charging box has been fully charged, the 4 LEDs of the
charging box (2) are lit blue. It takes about 2 hours to fully charge
the charging box.
• Disconnect all cable and mains connections after use.
Note
If you have not used the item for a few month, it may take 15-30
minutes for the status LED (2/4) to red when charging.
5.Operation
Switching the earphones on/off
• Turn On:
Make sure that both earphones are fully charged ( status LED (4)
off). Remove the earphones from the charging cradle at the same
time. Both earphones switch on automatically and begin pairing. A
voice says, ‘Power on – Pairing’.
• Turn Off:
With the earphones on, press and hold the Multifunction button
(5) on the left or right earphone for about 5 seconds until you hear