10
To change the equaliser settings, proceed as follows:
•
Press [ ] and open “System settings”.
•
Select the “Equaliser” menu item and confirm the
selection by pressing [
VOLUME/SELECT/NAVIGATE
].
•
Turn [
VOLUME/SELECT/NAVIGATE
] to select one of
the preconfigured profiles. If playback is already started
when you modify these settings, you can hear the
changes in the audio immediately.
•
Confirm the setting by pressing [
VOLUME/SELECT/
NAVIGATE
].
My EQ
•
Press [ ] and open “System settings”.
•
Select the “My EQ setting” menu item and confirm the
selection by pressing [
VOLUME/SELECT/NAVIGATE
].
•
Here you can configure the settings for the bass and
treble frequencies of the audio.
•
Turn [
VOLUME/SELECT/NAVIGATE
] to the left or right
to change a value. If music is playing while you modify
these settings, you will hear the changes in the audio
immediately.
•
When you have finished configuring the settings, press
[
VOLUME/SELECT/NAVIGATE
].
•
Press [ ] to save the settings for the “My EQ” profile.
•
To use the newly created profile, select the “My EQ”
option and confirm by pressing [
VOLUME/SELECT/
NAVIGATE
].
14.2 Time settings
•
Press [ ] and open “System settings”.
•
Select the “Clock” menu item and confirm the selection
by pressing [
VOLUME/SELECT/NAVIGATE
].
Time and date settings
•
Turn [
VOLUME/SELECT/NAVIGATE
] to set the time and
date digit by digit.
•
Press [
VOLUME/SELECT/NAVIGATE
] to confirm the
setting of each digit and move to the next.
•
Press [ ] to save the settings.
Updating
If automatic time and date adjustment is activated, the
device receives time and date information from the station
over the FM/DAB/DAB+ radio network. This is the best way
to ensure that the clock will run accurately and the alarm
will trigger at the correct time, even after power outages.
From ALL
– Time information is retrieved from all
available sources.
From digital radio
– Time information is retrieved only
from DAB stations.
From FM
– Time information is retrieved only from the
analogue radio network.
No updating
– No time information is retrieved (manual
updating).
Format
Choose between 12-hour and 24-hour time formats.
Date format
Choose between DD-MM-YYYY and MM-DD-YYYY date
formats.
14.3 Lighting
The backlight can be configured separately for each
operating mode (playback mode, standby mode and
snooze mode).
Proceed as follows:
•
Press [ ] and open “System settings”.
•
Select the “Lighting” menu item and confirm the
selection by pressing [
VOLUME/SELECT/NAVIGATE
].
