18
13. Bluetooth
®
You can pair your terminal device with the radio using
Bluetooth and use it as a playback device. You can control
playback directly on the terminal device. You can adjust
the volume on the radio, as well.
Note – Bluetooth
®
•
Check whether your mobile device (smartphone, tablet
PC. etc.) is Bluetooth-capable.
•
Note that the maximum range for Bluetooth
®
is
10 metres without obstacles such as walls, people, etc.
•
The connection may be disrupted by other Bluetooth
®
devices/connections in the vicinity.
•
It is only possible to connect the radio to one terminal
device.
•
Note that compatibility depends on the supported
Bluetooth
®
profiles as well as the Bluetooth
®
versions
being used. (See: Technical data in the operating
instructions for the respective device).
By repeatedly pressing [ ]/[
MODE
], enable Bluetooth
®
mode on the radio:
[ ]
Alternatively, press [
BT
] on the remote control to switch
directly to this operating mode.
13.1 Bluetooth
®
pairing
•
Make sure that your Bluetooth
®
capable terminal
device is switched on and that Bluetooth
®
is activated.
•
By repeatedly pressing [ ]/[
MODE
], enable Bluetooth
®
mode on the radio:
[ ]
•
Press [ ] (4) to access the Settings menu.
•
Use [
NAVIGATE/ENTER/VOLUME
] (9) to navigate
to the "Setup Bluetooth" menu item.
•
Open the Bluetooth
®
settings on your device and wait until
the list of found Bluetooth
®
devices shows
DIR90BT
.
•
If necessary, start searching for Bluetooth
®
devices on
your device.
•
Select
DIR90BT
and wait until radio is listed as connected
in the Bluetooth
®
settings of your device.
•
Your device is also shown as connected on the radio display.
•
Start and control audio playback using the controls
on your device.
Note - Bluetooth
®
password
Some devices require a password in order to connect
to another Bluetooth
®
device.
•
If your device requests a password to connect to the
loudspeaker, enter
0000
.
13.2 Automatic Bluetooth
®
connection
(after successful pairing)
•
Devices already paired with the radio are automatically
saved on the radio.
Note - connection impaired
After the radio and terminal device have been paired,
a connection is established automatically. If the Bluetooth
®
connection is not established automatically, check the
following:
•
In your device's Bluetooth
®
settings, check that
DIR90BT
is connected. If not, repeat the steps listed under
Bluetooth
®
pairing.
•
Check that your device and the radio are less than
10 metres apart. If not, move them closer together.
•
Check whether obstacles are impairing the range.
If so, move the devices closer together.
13.3 Terminating the Bluetooth
®
connection
[ ]
Main menu
Terminate connection
•
Then turn [
VOLUME/ENTER/NAVIGATE
] to select the
YES
button and confirm the termination of the Bluetooth
connection by pressing [
ENTER/NAVIGATE
].