Hama D3 223851, Руководство по эксплуатации

Страница: 4 / 8

2
G Operating instruction
Thank you for choosing a Hama
product.
Take your time and read the following instructions
and information completely.
Please keep these instructions in a safe place for
future reference.
1. Explanation of warning symbols and notes
Risk of electric shock
This symbol indicates a risk of electric shock
from touching product parts carrying hazardous
voltage.
Warning
This symbol is used to indicate safety instructions
or to draw your attention to specific hazards
and risks.
Note
This symbol is used to indicate additional
information or important notes.
2. Package contents
• Power strip
• These operating instructions
3. Safety instructions
• Use the product only for the intended purpose.
• Do not operate the product outside the power
limits specified in the technical data.
• Protect the product from dirt, moisture and
overheating and use it in dry environments only.
• Do not use the product in a damp environment
and avoid splashing water.
• Do not continue to operate the product if it is
visibly damaged.
• Do not bend or crush the cable.
• Do not drop the product and do not expose it to
any major shocks.
• Always pull directly on the plug when
disconnecting the cable, never on the cable itself.
• As with all electrical products, this device should
be kept out of the reach of children.
• Dispose of packaging material immediately in
accordance with the locally applicable regulations.
• Do not modify the product in any way. Doing so
voids the warranty.
• The product is intended for private, non-
commercial use only.
• The product is intended only for use inside
buildings.
• Do not use the product in the immediate vicinity of
heaters, other heat sources or in direct sunlight.
• Only use the article under moderate climatic
conditions.
• Do not use the product in areas in which electronic
products are not permitted.
• Route all cables so that there is no risk of tripping.
• Never connect multiple units of this product
in series.
• The product must only be operated on a supply
network as described on the type plate.
Risk of electric shock
• Do not open the device or continue to operate
it if it becomes damaged.
• Do not use the product if the
AC adapter, the adapter cable or the mains
cable are damaged.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to
qualified experts.
Warning
• Only operate the product from a socket that has
been approved for the device. The socket must
be installed close to the product and must be
easily accessible.
• Disconnect the product from the power supply
using the On/Off switch – if this is not available,
unplug the power cord from the socket.
• If using a multi-socket power strip, make
sure that the total power consumption of all
connected devices does not exceed the power
strip's maximum throughput rating.
• If you will not be using the product for a
prolonged period, disconnect it from mains
power.