Hama D3 223851, Руководство по эксплуатации

Страница: 5 / 8

3
4. USB operation
Warning – Connection of devices
• Before connecting a device, check whether it
can be adequately supplied with the charger's
current delivery.
• Ensure that the total output of all the connected
devices does not exceed 12 W.
• Note the instructions in your device's operating
manual.
Unless different instructions have been expressly
given in the operating instructions for the devices
you are charging, proceed as follows:
• Connect your device to a USB charging port using
a suitable USB cable.
• The charging process is displayed on your device.
• Disconnect the device from the charger if you wish
to interrupt the charging process or when the
device is fully charged.
5. Troubleshooting
The socket is not live. Check the domestic fuse.
Changing the fuse:
• Use a suitable screwdriver to loosen the screw (16)
on the mains plug cover (15) and remove it.
• Remove the fuse (17) and replace it with a
new one.
• Reattach the mains plug cover (15) and then close
it again using the screw (16).
6. Care and maintenance
Note
Disconnect the device from the mains before
cleaning and during prolonged periods of
non-use.
• Only clean this product with a slightly damp,
lint-free cloth and do not use aggressive cleaning
agents.
• Ensure that no water is able to enter the product.
7. Warranty disclaimer
Hama GmbH & Co KG assumes no liability and
provides no warranty for damage resulting from
improper installation/mounting, improper use of
the product or from failure to observe the operating
instructions and/or safety notes.
8. Technical data
Mains connection 250 V ~ / 13 A
Connected load max. 3250 W
Model identifier
D3
223851
223852
223853
223854
Input voltage 250V
Input AC frequency 50Hz
Output voltage /
output current /
power output
Total: 12 W
USB-A:
5V DC / 2.4 A
Max. current strength 13 A
Size 6.3 x 25.4 mm