29
Checking installation:
There are different LEDs for indicating the status on the top of the device:
LED
Condition
Status
POWER
Illuminated
Power supply unit is connected and supplying power
Off
No power unit connected, device not being supplied with power
WLAN device
Flashing
Wireless LAN is activated / data is being sent
Off
Wireless LAN is deactivated
SYNC
Illuminated
Modem has successfully synchronised with the switching centre
Flashing
Modem is attempting to synchronise with the switching centre
LAN 1-4
Illuminated
The corresponding LAN port has established a correct network connection
Flashing
Data transfer via respective LAN port
Off
No connection
2.
Confi guring the Operating System and Computer
The
TCP/IP
protocol must be installed on all PCs that will be using the Internet. By default, the
IP address
192.168.2.1
and an activated DHCP server are confi gured for the router. This means that the connected PCs are
automatically allocated suitable addresses and other settings. We recommend that you keep these settings.
Proceed as follows to check the settings on your PC:
On your Windows Desktop click
Start -> Settings -> Control Panel -> Network
Connections
or, with Windows Vista,
Start (Windows logo) -> Control Panel -> Network and
Internet -> Network Connections
Select the connection type (network adapter) between
your PC and the router, e.g. “LAN connection”. When
you right-click the corresponding connection, a menu is
displayed; select
Properties.
Select the
Internet Protocol (TCP/IP)
entry in the list
and then click
Properties
.
00062727bda.indd Abs2:29
00062727bda.indd Abs2:29
02.10.2007 11:14:35 Uhr
02.10.2007 11:14:35 Uhr
