38
Username:
Enter the user name that you received from your Internet provider in this fi eld.
Password:
Enter the user password that you received from your Internet provider in this fi eld.
Encapsulation:
The Hama WLAN ADSL2+ Modem Router supports the following
encapsulation protocols
:
PPPoE LLC, PPPoE VC-Mux, PPPoA LLC and PPPoA VC-Mux. If you are not sure which protocol
you need for your Internet connection, consult your DSL provider.
Bridge Interface:
Deactivated
This function should only be activated if you want to use the WLAN ADSL2+ Modem Router as a
modem only, and you want to switch off the router function.
Click
SAVE
at the bottom of the window to save your settings.
6.4 Connection setting (DSL connection setting)
In the following settings (Connection), you can choose between
Always On
and
Connect On-Demand
.
Always On:
The Internet is permanently connected. Connection costs may be high if you are permanently connected to the
internet and have a pay-as-you-go tariff.
Connect On-Demand:
The “Connect On-Demand” setting is recommended if you have a pay-as-you-go tariff (if you pay according to
volume or time). This means that the internet connection is disconnected automatically after the period set in the
“Close if idle for XY minutes” fi eld.
Important:
Please also note that closing
the browser does not
automatically disconnect you
from the internet. A number of
programs send queries to the
internet or receive data without it being clearly visible to the user. For the router, these queries are just as valid as
opening a browser, for example. If you want to ensure that there is no active connection to the internet, you should
switch off the device.
Click
SAVE
at the bottom of the window to save your settings.
00062727bda.indd Abs2:38
00062727bda.indd Abs2:38
02.10.2007 11:14:39 Uhr
02.10.2007 11:14:39 Uhr
