28
Package contents:
1x Hama Wireless LAN ADSL2+ Modem Router, 54 Mbps
1x 12 V power supply unit
1x Printed operating instructions
1x confi guration cable
Remark concerning the positioning:
The connection quality depends strongly on the place or surroundings where you put up the WLAN device. Please
ensure that the device or its antennae are neither covered nor built in. We advise you against putting it up near metallic
objects or other electric or radiant devices. In case of reception fl uctuations or connection interruptions we recommend
you to move interference sources such as DECT telephones, mobile phones, Bluetooth devices or other WLAN networks
out of the way. If this is not possible, it may also be helpful to change the cable.
System requirements:
• Operating system with TCP/IP protocol installed
• Java-capable web browser such as Mozilla Firefox, Microsoft Internet Explorer or Opera.
Safety instructions:
Do not use the device in moist or extremely dusty areas, on radiators or in the vicinity of heat sources. This device
is not designed for use outdoors. Protect the device from pressure and impact. The device may not be opened or
moved during operation. Do not use the device without an antenna attached
Caution
Use the router with the enclosed power supply unit only. Using other power supply units can cause
irreparable damage to the product.
Note: !!
The “Connect On-Demand” setting is recommended if you have a pay-as-you-go tariff (if you pay
according to volume or time). This means that the Internet connection is disconnected automatically
after the period set in the “Idle time” option. Connection costs may be high if you are permanently
connected to the internet. Please also note that closing the browser does not automatically
disconnect you from the Internet. A number of programs send queries to the Internet or receive
data without this being clearly indicated. For the router, these queries are just as valid as opening
a browser, for example. If you want to ensure that there is no active connection to the Internet, you
should switch off the device.
Requirements for installing the HAMA WLAN ADSL2+ Modem Router, 54 Mbps:
Ensure that you have the following before installing the Hama WLAN ADSL2+ Modem Router:
1. ADSL or ADSL2+-enabled connection
2. Installed DSL splitter provided by your DSL connection service provider
3. User information from your Internet provider
4. DSL connecting cable (between the splitter and modem)
5. CAT5 STP network cable with a RJ-45 connection
1 Connecting the WLAN ADSL2+ Modem Router:
1. Connect the computers and other network devices such as hubs/switches to sockets 1-4. Use a crossover
or CAT5 patch cable (max. 100 m). The integrated switch automatically detects the connection speed of 10 or
100 Mbps, half/full duplex transfer mode and the type of cable used.
2. Connect the DSL splitter to the “ADSL” connection on the rear of the WLAN ADSL2+ modem router using the
DSL connecting cable.
3. Plug the provided power supply unit into an empty socket and connect it to the router.
Caution
: Unsuitable power supply units can cause damage.
00062727bda.indd Abs2:28
00062727bda.indd Abs2:28
02.10.2007 11:14:34 Uhr
02.10.2007 11:14:34 Uhr
