2
G
Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and information
completely. Please keep these instructions in a safe place for
future reference. If you sell the device, please pass these operating
instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Risk of electric shock
This symbol indicates product parts energized with a dangerous
voltage of sufficient magnitude to constitute a risk of electric
shock.
Warning
This symbol is used to indicate safety instructions or to draw your
attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package Contents
• 433 MHz radio-controlled socket
• These operating instructions
3. Safety Notes
• Do not cover when in use.
• There is voltage running through the socket unless it is
unplugged.
• Only switch on and use with the safety covers closed.
• Do not use any heat-generating devices (such as electric
blankets, coffee machines, etc.) with this product. There is a risk
of fire and injury.
• Do not use this product with any devices that are motorised or
any devices that have a rotating component or workpiece. There
is a risk of injury.
• Never connect multiple units of this product in series.
• The product is intended for private, non-commercial use only.
• Use the product for its intended purpose only.
• Protect the product from dirt, moisture and overheating, and
only use it in a dry environment.
• The product is intended for indoor use only.
• Do not use the product in the immediate vicinity of heaters or
other heat sources or in direct sunlight.
• Use the item only in moderate climatic conditions.
• Keep this product, as all electrical products, out of the reach
of children!
• Do not use the product in areas where the use of electronic
devices is not permitted.
• Do not use the product in moist environments and avoid
splashes.
• Do not drop the product and do not expose it to any major
shocks.
• Do not modify the product in any way. Doing so voids the
warranty.
• Keep the packaging material out of the reach of children due to
the risk of suffocation.
• Dispose of packaging material immediately according to locally
applicable regulations.
• Lay all cables so that they do not pose a tripping hazard.
• Do not bend or crush the cable.
• Always pull directly on the plug when disconnecting the cable,
never on the cable itself.
• Do not operate the product outside the power limits given in
the specifications.
• Never connect the radio-controlled socket to an extension cable
or adapter. It must be plugged directly into a mains socket.
Connecting the timer in any other way may cause it to overheat.
• Use the timer switch only in permanent wall sockets.
4. Connecting and getting started
Risk of electric shock
• Do not open the device or continue to operate it if it
becomes damaged.
• Do not use the product if the
AC adapter, the adapter cable or the mains cable are
damaged.
• Do not attempt to service or repair the product yourself.
Leave any and all service work to qualified experts.
Warning
• Only operate the product from a socket that has been
approved for the device. The socket must be installed close
to the product and must be easily accessible.
• Disconnect the product from the power supply using the On/
Off switch – if this is not available, unplug the power cord
from the socket.
• If using a multi-socket power strip, make sure that the total
power consumption of all connected devices does not exceed
the power strip's maximum throughput rating.
• If you will not be using the product for a prolonged period,
disconnect it from mains power.
Now plug the radio-controlled socket into an earthed socket.
To test the radio-controlled socket and for manual use without
a remote control, press the “On/Off” button. When the button is
pressed, the LED of the radio-controlled socket should light up.
When you press the button again, the LED should go out.
This product is for indoor use only.
