2
G
Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep
these instructions in a safe place for future reference. If you sell the device, please pass
these operating instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention to specific
hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
2. Package Contents
•
1 speaker stand
•
Installation kit (see contents, Fig. 1)
•
These operating instructions
Note
Please check that the installation kit is complete before installing the product and
ensure that none of the parts are faulty or damaged.
3. Safety Notes
Warning
•
Read the operating instructions for your terminal device before attempting to
mount it. The instructions provide information about the type and measurements
of suitable fastening materials.
•
Never apply force during mounting. This can damage your terminal device or the
product.
•
If in doubt, have this product mounted by a qualified technician - do not attempt
to mount it yourself!
•
Once you have mounted the product and the attached load, check that they are
sufficiently secure and safe to use.
•
You should repeat this check at regular intervals
(at least every three months).
•
When doing so, ensure that the product does not exceed its maximum permitted
carrying capacity and that no load exceeding the maximum permitted dimensions is
attached.
•
Make sure that the product is loaded symmetrically.
•
Maintain the necessary safety clearance around the attached load (depending on the
model).
•
In the event of damage to the product, remove the attached load and stop using the
product.
4. Intended use and specifications
•
The product is for domestic use
•
The product is intended for indoor use only.
•
Only use the product for the intended purpose.
•
Maximum load bearing capacity: 3 kg
•
Overall height: 97.3 cm
5. Installation requirements and installation
Note
•
Only mount the product with the help of a second person. Get the support and
help you need.
•
The same mounting kit is included with all of our TV wall brackets. Depending on
the product and mounting type, you may not need to use the entire mounting kit.
Unneeded screws and other small parts may be left over, even if the wall bracket
is properly mounted. Keep these leftover parts with the operating instructions in a
safe place, just in case you might need them later on.
•
During installation, secure the hinges so that the product can be tilted and moved
side-to-side.
•
For easily mounting the cables let a weightened cord glide through the cable guide,
attach the cables to the cord, pull them up and store the cables in a matter of seconds.
•
Observe the other warnings and safety instructions.
•
Proceed step-for-step in accordance with the illustrated installation instructions (Fig.
1 ff.).
Warning
Use the included spikes (A2) only on suitable floors. The spikes may cause damage to
parquet or laminate, for example.
6. Setting and maintenance
Warning
Always adjust the product with the help of a second person. Get the support and
help you need.
•
To adjust the inclination, loosen the screw slightly, set the desired angle and then
retighten the screw securely.
•
Screws do not have to be loosened for side-to-side movement.
•
Check that the bracket is secure and safe to use at regular intervals (at least every three
months). Only use water or standard household cleaners for cleaning.
7. Warranty Disclaimer
Hama GmbH & Co. KG assumes no liability and provides no warranty for damage resulting
from improper installation/mounting, improper use of the product or from failure to
observe the operating instructions and/or safety notes.
8. Service and Support
Please contact Hama Product Consulting if you have any questions about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com